linksys wrtgs and oqo model 2

[Guest]

[andy.song]

I have trouble connecting my oqo model 2 to linksys wrtgs router, it stopped at "Acciquring Network Address", the link speed was witching between 54Mbps to 108Mbps back and forth in the connection windows, the signal level looked good.

My another notebook has no problem connecting to router at all.

The router is using WPA+AES, tried different channel, or tried switch to 802.11b in router, the same problem.

Connected once while I turned off all security in the router, but the connection unstable.

While I tried connecting to other network(open wireless network provided by others), it seems fine.

Any help or suggestion?

[andy.song]

will try to upgrade firmware on linksys, will post the result later.

[Picasso]

try dd-wrt for you linksys. Depending on the version of you WRT it's a simple install and will give you a number of new options.

[andy.song]

Still no luck after firmware upgarde, I won't flashed my WRTGS, I have a bunch of servers, bridge and notebook relying on it.

Need you suggestions, is there a new atheros driver?

[Picasso]

Only the drivers on the OQO site.

Change on the linksys the antenna selection  from auto to left/right. Doing that has worked for me on some flacky wireless.


should look at ss-wrt wont take you long to copy yer config and move it over after you flash.